1. Detach the Throttle-extension bar loosening set screws.
2. Detach the engine mount of Right side removing cap screws.
Content： ●Conversion mount ●M4x14 Cap screw to fix the mount x 6pcs
You will also need： ●Stand-off mount
（mount spacer）
ｘ4pcs
●※
1
M5 bolt ｘ4pcs
(Select adequate length according to the
stand-off mount as shown in the right figure.)
●※
2
M5 nut (Flange nut is recommended) x 4pcs
●Anti-loosening glue
3. Detach the carburetor together with the joint plate removing the
cap screw from the bottom side.
4. Detach the engine mount of Left side removing cap screws.
FG-60R3/73R5 Conversion mount installation manual
※
2
Flange nut（Recommended）
4~5mm
Stand-off mount
Firewall
Conversion
mount
※
1
-1-
