rulmeca RDR BL3, Техническое руководство

Страница: 37 / 40

TECHNICAL MANUAL FOR THE RDR BL3 - V1.1 DRIVE ROLLER Rev. 21/09/2018 page 37
15 DECOMMISSIONING - DISMANTLING THE DRIVE ROLLER
The Drive Rollers must be decommissioned or simply dismantled only by qualified and authorized persons.
Before dismantling the Drive Roller, make sure that you have disconnected the electric supply system so as to
eliminate any possibility of the Drive Roller being started up accidentally.
-
Then disconnect the Drive Roller's power cable.
- Loosen the outer M12 nut (holding the inner M12 nut with a wrench), and the M8 screw fixing it to the structure.
-
Extract the Drive Roller from its seat, gently without damaging the cable.
- In the presence of Poly-V belts, pay extreme caution in order to not nip your fingers or damage the belts.
-
If the Drive Roller has to be sent to Rulmeca for tests or repairs, dismantle it carefully: do not twist or strip the
cable and under no circumstances lift up the Drive Roller by its cable. Drive Rollers with damaged cables are
not covered by warranty.
Under no circumstances shall Rulli Rulmeca be liable for incorrect decommissioning of the Drive Roller or for any
damage arising therefrom.
16 DISPOSAL OF THE DRIVE ROLLER
The last owner of the Drive Roller is responsible for disposing of it correctly after dismantling it from the conveyor.
If the customer is unable to dispose of the Drive Roller correctly, he must contact
Rulli Rulmeca S.p.A.
Follow the dismantling procedures prescribed by the legislation in force in the
place in which dismantling will take place.
Under no circumstances shall Rulli Rulmeca be liable for improper disposal of
the Drive Roller or for any resulting harm to the environment or people.