·
Product Images
Figure 1-1 Front Panel
Figure 1-2 Back Panel
Indicators and Buttons
Mark
Note
Description
SYS
System status indicator of
the local control board
Off: The system is not powered on or the system is
abnormal.
Solid red: The system is abnormal.
Blinking green: The system is initializing.
Solid green: The system has completed initialization and
is operational.
PWR0 and PWR1
Power status indicator
(corresponding to power
module slots 0 and 1)
Off: The power module is not installed.
Solid red: The module is abnormal or is not powered on.
Solid green: The module is operational.
Slot 0/3
Slot 0/4
HSIC slot status indicator
Off: The module is not powered on or is not properly
inserted, or the module can be unplugged.
Blinking green: The module is initializing.
Solid green: Initialization is complete, and the module is
operational.
SD
SD card status indicator
Off: The SD card is not installed, is not properly inserted,
or can be unplugged.
Solid red: The device is abnormal.
Blinking green: The system is accessing the SD card.
Solid green: The device is operational.
1000M
GE0 port rate indicator
Off: 10 M or 100 M.
Solid orange: 1000 M link up.
Link/Act
GE0 port status indicator
Off: The port is not connected.
Solid green: The port is connected at 10/100/1000 Mbps.
Blinking green: The port is transmitting or receiving data
at 10/100/1000 Mbps.
RJ45
1-8
Status indicator for RJ45
ports 1 to 8
Off: The port is not connected.
Solid green: The port is connected at 1000 Mbps.
Blinking green: The port is transmitting or receiving data
