·
6.2 Label Pasting
Before pasting labels, write the content on the label paper, strip the label off, and then paste it to the cable or signboard
cable tie.
1. Position
A label is pasted 2 cm away from the plug by default and can be flexible adjusted, for example, the label should not be
pasted on the curved position or other positions that may affect the installation. The text on a label must be in the format
from left to right or from up to down, as shown in Figure 6-1. Details are as follows:
1. When the cable is vertically laid, the label should be in the format from left to right.
2. When the cable is horizontally laid, the label should be in the format from up down.
Figure 6-1 Left-right or up-down label text
2. Pasting Procedure
Figure 6-2 Label pasting
Paste side
