Ruijie RG-S5750-S Series, Руководство по установке и справочное руководство по оборудованию

Страница: 29 / 47

 Whether power cables are already laid out and whether the requirements of electrical current are met
 Whether related network cables are already laid out
Installing the RG-S5750-S Series
Precautions
Following matters must be noted before installation:
 Connect the power cables of different colors to the corresponding grounding posts.
 Ensure that the connected power cables have sound contact.
 Do not place heavy items on the switch.
 Reserve a spacing of at least 10 cm around the chassis for good ventilation. Do not stack the devices.
 The switch should be located far away from the large power radio launch pad, radar launch pad, and
high-frequency large-current devices. If necessary, electromagnetic shielding should be adopted. For example,
use interface cables to shield cables.
 Interface cables should be laid inside the equipment room. Outdoor cabling is prohibited, avoiding damages to
device signal interfaces caused by over-voltage or over-current of lightning.
Mounting the Switch in a Standard 19-inch Rack
The RG-S5750-S series switches are designed with the EIA standard dimensions and can be installed in 19-inch rack.
The installation is as follows:
Step 1: Attach the mounting brackets to the switch with the supplied screws, as shown in Figure 3-1.
Figure 3-1 Attaching the Mounting Bracket to the Switch