Ruijie RG-S5750-S Series, Руководство по установке и справочное руководство по оборудованию

Страница: 13 / 47

LED Indicators
Table1-6
Indicator Panel Identification Status Meaning
Off The switch is not powered on.
Blinking green The switch is being initialized. If the blinking
persists, however, it indicates that an abnormality
occurs.
Solid green The switch is operational.
Solid yellow It indicates a warning on the switch temperature.
Check the working environment of the switch
immediately.
Status indicator Status
Solid red Indicates a fault on the switch. For details, refer
to Section 5.2 Troubleshooting Common Faults.
Off There is no extension module or the extension
module is not correctly installed.
Extension module
indicator M1 / M2
Solid green The extension module is correctly installed.
Off The redundant power is not connected to a link.
Solid green The redundant power is connected and can
supply power.
Solid yellow The redundant power is supplying power.
RPS status indicator
RPS
Solid red The redundant power is connected but cannot
supply power.
Off T No link, or port was administratively shut down.
Solid green The 1000 M link that the port connects to is Up.
Blinking green Data at a rate of 1000 M are being transceived at
the port.
Solid yellow The 100 M link that the port connects to is Up.
1000Mbps SFP port
indicator
45F-48F
Blinking yellow Data at a rate of 100 M are being transceived at
the port.
Off No link, or port was administratively shut down.
Solid green The 1000 M link that the port connects to is Up.
Blinking green Data at a rate of 1000 M are being transceived at
the port.
Solid yellow The 100 or 10 M link that the port connects to is
Up.
1000Mbps RJ-45
port indicator
1-48
Blinking yellow Data at a rate of 100 or 10 M are being
transceived at the port.
RG-S5750-24SFP/8GT-S
Technical Specifications
Table1-7