Hardware Installation and Reference Guide
Overview
37
Item
Description
Port mode switch-over button
Support switchover in three modes:
Flow Control On
Flow Control Off
Port Isolation. When this mode is enabled, ports 1-24 are isolated
from each other, but can communicate with ports 25, 26 and 26F.
RJ-45 10/100Base-TX
auto-sensing Ethernet port
10/100Base-TX adaptive Ethernet portthat supports PoE power supply.
The copper port uses an RJ45 connector.
10/100/1000Base-T
auto-sensing Ethernet port
10/100/1000Base-T adaptive Ethernet port. The copper port uses an RJ45
connector.
10/100/1000Base-T combo port
10/100/1000Base-T combo port is an interface that can be used as an
electrical or optical interface
，
but they cannot work at the same time.
1.9.4
Ports - Rear Panel
Figure 1-24 shows the rear panel of an
RG-ES126S-LP
switch. For detailed meanings of numbers 1 to 2, see
the following table.
Figure 1-24
Back Panel of RG-ES126S-LP
Item
Description
Grounding pole
Used to fasten the ground cable.
AC power port
Connect to AC power cables
1.9.5
Technical Specifications
Table 1-16
Technical Specifications of an RG-ES126S-LP Switch
Model
RG-ES126S-LP
