Hardware Installation and Reference Guide
Overview
32
Item
Description
Port status indicator
RJ-45 port status:
○
Solid green: The port is connected at 10/100/1000 Mbps.
○
Blinking green: The port is receiving or sending traffic at
10/100/1000 Mbps.
○
Off: The port is not connected.
SFP port status:
○
Off: The port is not connected.
○
Solid orange: The port is connected at 100 Mbps.
○
Blinking orange: The port is receiving or sending traffic at 100
Mbps.
○
Solid green: The port is connected at 1000 Mbps.
○
Blinking green: The port is receiving or sending traffic at 1000
Mbps.
PoE status indicator
PoE status indicator for ports 1-16. The statuses are as follows:
Solid green: PoE is operational.
Blinking green: PoE is overloaded.
Off: PoE does not supply power.
Port mode switch-over button
Support switchover in three modes:
Flow Control On
Flow Control Off
Port Isolation. When this mode is enabled, ports 1-16 are isolated
from each other, but can communicate with ports 17 and 18.
RJ-45 10/100/1000Base-T
auto-sensing Ethernet port
10/100/1000Base-T adaptive Ethernet port that supports PoE power
supply. The copper port uses an RJ45 connector.
100/1000Base-T SFP port
SFP port. For details about applicable transceiver modules, see
1.8.4
Ports - Rear Panel
Figure 1-21 shows the rear panel of an RG-ES118GS-P switch. For detailed meanings of numbers 1 to 2, see
the following table.
