RuiDa RDC6585G, Руководство пользователя

Страница: 56 / 73

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY 49
The operation method is the same as manual setting.
When “Continue” item is selected, then the “Laser time” item is not valid, on that time, push the
Laser key to splash the enabled lasers, and when Laser key is loosed, then the lasers will finish
splashing. When the Laser mode item is “Manual”, then pushing the Laser key one time, the
enabled lasers will splash a fixed time.
8.7.5 Diagnose
Select the "Diagnose" entry under the funtions interface, press the <Enter> key, and then pop up
the interface as follows:
This interface displays the system's limit input status, water protection input status, and general
input port status., and reads the hardware information of the system by pressing the
<Enter> key.
When the hardware signal is triggered, the small box on the left side of the corresponding entry
will show red. Otherwise, it will show gray. Press the
<Esc> key to return to the previous menu.
Figure 8.7.4
Figure 8.7.5-1