RuiDa RDC6585G, Руководство пользователя

Страница: 55 / 73

RDC6585G Control System Manual V1.0
SHENZHEN RUIDA TECHNOLOGY 48
8.7.3 Manual setting
Select the "Manual setting" entry under the funtions interface, press the <Enter> button, and then
pop up the interface as follows:
Manual mode has “Continue” and “Manual”, press the <Enter> key to enter the modification mode
("blue selection block" right side becomes
), press the "up/down" key to modify, after the
modification, press the
<Enter>
key to exit the modification mode. After all modifications, move
the “Select block” to the Write Parameters entry and press the <Enter> key. The parameter
settings take effect. Press <Esc> key to return to the previous menu.
When “Continue” item is selected, then the “Manual” item is not valid, on that time, push the
direction keys to move the corresponding axes, and when the pushed key is loosed, then the
corresponding axes will finish moving. When the Mode item is “manual”, then pushing the
direction key one time, the corresponding axes will move a fixed length, unless the scope is
overstepped.
8.7.4 Laser Setting
Select the "Laser setting" entry under the funtions interface, press the <Enter> button, and then
pop up the interface as follows:
Figure 8.7.3