RDLC320 Controller User Manual
29 / 45
© 2016 Ruida Technology. All Rights Reserved.
(7) Start/Pause key
Under the four main interfaces it is ok to press the Start/Pause key. Press this key
on the system idle interface or work finished interface; the selected file will be
processed. Press this key under the running system interface, and the work will be
suspended. Press this key under the suspended system interface, and the suspended
work will continue.
(8) Origin key
It will respond when this key is pressed under the idle system interface or the
work finished interface. If the single setpoint logic is selected by the system, press this
key and the controller will take the current X/Y-axle position of the machine as the
relative origin of the figure; if the multiple setpoint logic is selected by the system, it
is invalid to press this key at any time.
(9) Frame key
It is valid to press this key under the idle system interface and the work finished
interface. Press this key and the bordering will be operated on the currently selected
file.
(10) Esc and Enter key
Press the Esc or Enter key under different interfaces means to confirm or deny
this operation.
(11) Directional Keys (Up, Down, Left and Right keys)
In addition to being used for modifying parameters and moving the cursor as
abovementioned, the directional keys can be used to move the kinematic axis under
such three interfaces as idle, suspended system or work finished interface. Under such
Start/
Pause
Origin
Frame
Esc
Enter
