manualshive.com logo in svg

Ruckus Wireless MM2211, Руководство пользователя, Страница: 49 / 58

Поделиться
Скачать
Ruckus Wireless MM2211 Скачать руководство пользователя страница 49

8000013, December 2006

 MM2211 Wireless Broadband Gateway  User’s Guide

49

Updating the Firmware

Updating the Firmware

This menu provides a utility for updating the MM2211 Gateway’s firmware. A firmware update may be 
necessary or desirable to add new features, important fixes or enhancements to the MM2211 Gateway.

The MM2211 is provided with an automatic firmware upgrade feature. This feature checks to verify that you 
have the latest firmware when you reboot the MM2211, or at an interval you set even if you do not reboot. 
The automatic firmware upgrade is the default option. You may wish to disable the automatic firmware 
upgrade, and select manual firmware upgrade.

1.

In the Ruckus Wireless Web Interface, click the 

Maintenance->Upgrade

 menu. The window of 

Figure 25

appears.

Phy Rate (Mbps)

The data rate of the PHY in Mbps.

Throughput Estimate (Mbps)

The theoretically possible receive or transmit throughput in megabits per 
second.

PER (%)

The PHY error rate expressed as a percent.

Estimated SNR (dB)

The estimated signal to noise ratio in dB.

Discards CRC Errors

The number of packets with CRC error received or transmitted by the 
interface.

Noise Floor (dB)

The value of the noise floor, expressed in dB.

Table 16—Wireless Statistics  (Continued)

Field

Description

Содержание MM2211



























































Отзывы:

Нет отзывов