8000013, December 2006
MM2211 Wireless Broadband Gateway User’s Guide
31
Configuring the Wireless Interface
Configuring the Wireless Interface
It is recommended that you consult with your service provider to understand the wireless settings. Before
changing any settings in the Wireless configuration menu, make sure you have recorded and verified the
information in the following worksheets:
•
"Wireless Network Settings Worksheet" on page 20
•
"MM2211 Gateway Default and User Settings Worksheet" on page 21
.
For dual zone operation, the following should be noted:
•
Dual zone functionality is limited to route mode; it will not function in bridge mode.
•
When the WAN wireless security settings are enabled, the number of WEP keys available on the LAN side
will be reduced.
•
When WAN connectivity is lost, LAN wireless connectivity is marked as being down.
•
Security setting options are as follows:
• WAN—Disabled, WEP, WPA-PSK, 802.1x
• LAN—Disabled, WEP, WPA-PSK
WAN SSID Configuration
1.
After connecting to the MM2211 Gateway, choose
Configuration->Wireless
. The window of
Figure 12
appears.
NAT
Selecting NAT (Network Address Translation) will perform all address translation from
the internal IP address to external IP address.
User Name
The user name. The default user name is
admin
. If you change the user name, make
sure to write it down for future reference.
Password / Confirm
The user password. The default is
password
. If you change the password, make sure
to write it down for future reference.
Table 7—System Configuration—Route Mode (Continued)
Field
Description