8000013, December 2006
MM2211 Wireless Broadband Gateway User’s Guide
27
Configuring the MM2211 Gateway
6.
Click
Reboot
to reboot the device so configuration changes can take effect.
!
CAUTION:—You must click the Update button to save any configuration changes. The Ruckus
Wireless Web Interface will timeout after 5 minutes of inactivity. If you let the system time out before clicking
the Update button, any changes you made will be lost.
!
CAUTION:—If, after having changed any default settings, you have forgotten what the new settings are, you
may not be able to login to the MM2211 Gateway. To regain access to the MM2211 Gateway, you must reset
the device to its factory default settings. Hold the button down for more than 8 seconds, then release. The Air
Quality indicator will go off and then back on.
Management IP Configuration
You can control who can remotely access your MM2211 from the WAN side, and how they can exercise this
control, either by a web-based graphic user interface (HTTP) or by a command line interface (CLI). The
access control method is to restrict the IP address for remote management users to a predetermined number
of users.
Proceed as follows:
1.
Choose Configuration->System (
Figure 9
).
Figure 9—Management IP Configuration