manualshive.com logo in svg

Ruckus Wireless MM2211, Руководство пользователя, Страница: 42 / 58

Поделиться
Скачать
Ruckus Wireless MM2211 Скачать руководство пользователя страница 42

42

 MM2211 Wireless Broadband Gateway  User’s Guide

8000013, December 2006

Configuring the Wireless Interface

Figure 20—Advanced Wireless Configuration

Table 12

 shows the Advanced Wireless Configuration parameters.

Table 12—Advanced Wireless Configuration Parameters

Field

Description

Wireless Mode

Sets the wireless mode for the MM2211 Gateway. The wireless mode 
determines the wireless speed of devices that are allowed to associate to 
the MM2211 Gateway. Options are:

•

802.11g&b: stations running at either 802.11g (2.4GHz, 54Mbps) 
or 802.11b (2.4GHz 11Mbps) can associate to the MM2211 
Gateway. This is the default setting.

•

2.4GHz 54Mbps (802.11g only)

•

2.4 GHz Auto 108Mbps (802.11g Turbo)

•

2.4 GHz 108 Mbps Only (802.11g Turbo)

Super G

Enables Super G. Super G allows communications with the remote 
Access Point in “Super G” mode (implementing frame-bursting and 
compression). This is not supported in many metro applications. It is 
recommended to leave this off unless informed otherwise by your service 
provider.

Data Rate

Select the desired data rate from the drop-down menu. The default is 

Best

, which means the system will adjust the data rate automatically.

Содержание MM2211



























































Отзывы:

Нет отзывов