background image

2

English

  

Tel. +49 7930 9211-0               Fax +49 7930 9211-150

Information updated: print 03.12.2021    
We reserve the right to make changes

The original manual has been pro-

duced in the German language.

mwr_rok_v_pb_04_en  print 03.12.2021

ruck

 

Ventilatoren GmbH

        Max-Planck-Str. 5        D-97944 Boxberg-Windischbuch       

Tel.

 +49 7930 9211-0       

Fax

 +49 7930 9211-150       [email protected]

The data specified above only serve to describe the product. No 

statements concerning a certain condition or suitability for a cer

-

tain application can be derived from our information. The informa-

tion given does not release the user from the obligation of own 

judgment and verification.

It must be remembered that our products are subject to a natural 

process of wear and aging.

This document, as well as the data, specifications and other in

-

formation set forth in it, are the exclusive property of 

ruck

 

Ven-

tilatoren GmbH.

 

It may not be reproduced or given to third parties without its con

-

sent.

The picture on the cover shows an example configuration. The 

product supplied may therefore differ from the illustration. 

Содержание ROTO K 1050 V WOJL





































































Отзывы: