H2O Manual | 18
Menu: Function View
The Function View is where you can interact
with your Synapse H2O.
Boost:
The Synapse H2O will heat the water
to the Boost setpoint in the shortest possible
time, which will use AC power. Tap again to
deactivate Boost.
Turn Grid Off:
This disables the use of grid power
for heating your water, even if it is available. Tap
again to deactivate.
Away:
This will stop heating your water from
all sources until deselected and the H2O is on
standby. Tap again to deactivate Away mode.
Notifications: All errors or other notifications will
be displayed here.
Settings:
You can change the temperature
setpoints for Grid, Solar and Boost modes here.
Support: Contact Rubicon for support from here.
Menu: Energy consumption
This view allows you to visualise your energy
usage statistics by the different modes, filtered
by your preferred period.
To view the graph, select a start and end date
and then tap Get Data.
It is also possible to view the last 7 days’ history
in bar graph format by tapping the Seven Days
tab.
Menu: Geyser activity
The Geyser Activity view enables the user to
view the geyser’s temperature and heating
cycles by source graphically over a period.
To create a graph, select start and end dates and
then tap Get Data. Once the graph is displayed,
you can turn each power source’s activity on or
off by tapping either the grid or solar icons.
