Date:
09-May-2019
Product name
RTX2018
File
: RTX2018 User Manual 1.0.docx
Ref.: FHA
Page: 10 of 34
This document and the information contained is property of RTX A/S, Denmark, and should be regarded as confidential.
Unauthorized copying is not allowed. The information in this document is believed to be correct at the time of writing. RTX A/S
reserves the right at any time to change said content, circuitry and specifications.
3
RTX2018 Pre-installation
3.1
System Overview
The RTX2018 tester can be installed in two ways:
•
On a single PC, where both the CMW100 driver and RTX2018 DLL/GUI are installed
•
On two PCs, where the CMW100 driver is installed on the PC connected to the
CMW100 hardware (s
ometimes referred as the “server”)
and the RTX2018 DLL/GUI
on another PC
The two above options exist as the connection between the CMW100 driver and the RTX2018
DLL and is an IP connection (on port 5025). In the first case,
the connection is the “Localhost”
or IP address 127.0.0.1
3.2
Driver Installation
The CMW100 driver needs to be installed on the server PC to which the CMW100 is connected
via USB. Please refer to [2] for a detailed description of the installation.
Please note that the RTX2018 requires installation of the following two Rohde & Schwarz
packages:
CMW_BASE (File name Setup_CMW1xx_BASE(RELEASE)_x.x.xx_64Bit.exe)
CMW_GPRF (File name: Setup_CMW1xx_GPRF(RELEASE)_x.x.xx_64Bit.exe)
This version of the RTX2018 has been tested with:
CMW BASE version 3.7.60
CMW GPRF version 3.7.30
3.3
Waveform Installation
For the BER measurements, it is necessary to install the included waveform files on the PC
connected with the CMW100 hardware.
The default location for these waveform files is: C:\RTX2018
When using the RTX Dialog DA14495 firmware
(Note 1)
in the DUT, the following files are
required to allow testing of the four modulation formats:
•
gfsk.wv (for GFSK)
•
pi2.wv (for PI/2-DBPSK)
•
pi4.wv (for PI/4-DQPSK)
•
pi8.wv (for PI/8-D8PSK)
Note 1:
RTX firmware including BER/FER test capability and Prod Test Interface for remote
control