RTRMAX RTH150, Оригинальное руководство пользователя

Страница: 7 / 25

Проверил: Р.Ч./24.03.2015г
Place the front edge of the base plate on the workpiece and switch on. Press the machine firmly
against the workpiece and plunge the saw blade slowly into the workpiece.
After reaching the required cutting depth, bring the machine again to the normal working position
so that the complete surface of the base plate rests on the workpiece and continue to saw along
the cutting line.
After completing the cut , switch off the machine first and then pull it out of the cut.
MAINTENANCE AND CLEANING
Before any work on the machine itself, pull the mains plug.
Guide roller should occasionally be checked for wear and lubricated with a drop of oil. If it is
worn , it must be changed. For safe and proper working , always keep the machine and the
ventilation slots clean.
If the machine should happen to fail despite the care taken in manufacture and testing, repair
should be carried out by an authorized customer services agent for
Rtrmax power tools .