RTI Vortex 850R Series, Руководство пользователя

Страница: 121 / 138

121
As Needed Maintenance Tasks
The following general maintenance tasks should be performed on an as needed basis,
based upon inspection during every day use and/or when performing other tasks.
The printhead cartridge should be manually wiped after the following occurrences:

after paper jams

before re-installing a used printhead cartridge into the print engine

if print quality is showing signs of contamination

if automated maintenance algorithms prove ineffective for nozzle recovery
There are two methods for cleaning the print head cartridge; one with it installed and
onewith it removed from the unit. Both methods are listed below. When removing and
re- installing a used printhead or when replacing a printhead, use the second method.
Printhead Cartridge Cleaning (Manual Wipe While Installed)
Perform the following steps to ensure proper printhead cleaning without removing it:

Pinch the clamshell latches to release. Open the clamshell and allow the upper portion
to rest on the hard stops.
Figure 154
Opened Clamshell