RSP P0602, Руководство по эксплуатации продукта

Страница: 33 / 42

M0604-1 ver. 2.3 33
4.4 Replacement of wear parts
4.4.1 Replacement of air sealing
Action Note
1 Remove the air sealings with a
screw driver.
2 Wipe clean the sealing holes. Remove all remaining parts of the sealing.
3 Mount new air sealings Tap in the air sealings with a plastic mallet.
4.4.2 Replacement of signal pins (TC350-8E only)
Replace a signal pin when the spring jams, or become bent.
Action Note
1 Switch the power off and lock the
circuit breaker.
2 Pull out the signal pins with a pair
of pliers.
3 Fit the new signal pins by pushing
them into the sleeves The brass coloured part of the signal pins
should be pressed fully into the sleeve.
4 Unlock the circuit breaker and
switch the power on.