RSP P0602, Руководство по эксплуатации продукта

Страница: 29 / 42

M0604-1 ver. 2.3 29
4.1.4 Activities and intervals on tool changer
Equipment Maintenance
activity Interval Description
Tool changer Inspection 2 weeks Visual inspection of tool changer (see section
4.2.1).
Tool changer Cleaning 1 month Cleaning of tool changer, interval depending on
the environment (see section 4.3.1).
Guide pin Clean and
lubricate 1 month Wipe the pins clean and add new lubrication
(see section 4.3.1).
Air sealings Replace 18 months Wear parts, interval is depending on number of
tool changes and the environment (see section
4.4.1).
Signal pins Replace 18 months Wear parts, interval is depending on number of
tool changes and the environment (see section
4.4.2).
O-ring Replace 18 months Wear parts, interval is depending on number of
tool changes and the environment (see section
4.4.3).
Tool changer Service 5 years Complete service, to be done by Robot System
Products (see section 4.5).
4.1.5 Activities and intervals on tool attachment
Equipment Maintenance
activity Interval Description
Tool attachment Inspection 2 weeks Visual inspection of tool attachment (see section
4.2.2).
Tool attachment Cleaning 1 months Cleaning of tool attachment, interval depending
on the environment
(see section 4.3.2) .
Grooves Cleaning 1 months Wipe the grooves for the locking balls ( see
section 4.3.2).
Signal contacts
Cleaning 1 months Wipe the contact surfaces clean ( see section
4.3.2).