RSF Energy OPEL 2000, Руководство пользователя

Страница: 7 / 40

OPEL 2000 7
Picture 3 Picture 4
GLASS
In a controlled combustion firebox, temperatures are not
always high enough to keep the glass perfectly clean.
A good hot fire in the morning usually cleans off most of
the deposits that have accumulated during the night.
Remember the drier the wood, the cleaner the glass. A
word of caution: although heat will not break the glass,
a good blow can. Be careful not to hit the glass.
WARNING: Never clean this glass with an abrasive
cleaner. Use only a cleaner recommended by your dealer.
Never clean the glass while it is hot. You risk get-
ting a serious burn.
If your glass breaks:
See your dealer for the exact replacement glass. If the
gasket is damaged, it must be replaced with the identi-
cal kind (R7002). Place the gasket on the door frame
between the door and the glass (it is self-sticking).
1. Remove the door from the fireplace by lifting it off the
hinges.
2. Remove the clips holding the glass.
3. Clean out any bits of glass and dirt from the gasket.
4. Place the new glass into the opening and replace the
clips being careful not to over-tighten the screws.
5. Check the glass by trying to move it back and forth.
It should feel snug, but move slightly without too much
effort.
GOLD PLATING
If you have gold doors or gold louvers, you will be happy
to know that they will not tarnish however, they are not
scratch resistant. They require a totally abrasive free
cleaner. Use only mild soap and warm water to clean
the gold when the surface is cool. The use of any
household cleaner, such as Windex, abrasive cleaners,
or any form of acid, may permanently etch or remove
some of the gold plating. Before every fire, be abso-
lutely sure to wipe off all fingerprints from the gold plat-
ing. Acid from debris or your fingerprints may perma-
nently etch the gold plating .
Picture 5