RS Automation NX-POSI1, Руководство пользователя

Страница: 162 / 196

162
Cases in which errors occur, and their contents
1. The position command value and the control code are not subject to setting
errors regardless of whether the increment or absolute method is selected.
2. Data of shaded area is not subject to errors.
3. When starting any of the modes (except pulser input operation), an error will
occur if the startup speed setting is greater than or equal to the target speed
setting.
4. A setting change can only be made during JOG operation if linear acceleration/
deceleration is selected.
Item
At startup setting
At setting change during
operation
Negative
number
0
Out of
range
Negative
number
0
Out of
range
E point
control
startup speed Error Error
No applicable condition
target speed Error Error Error
Acceleration/
deceleration time
Error Error
P point
control
startup speed Error Error
target speed Error Error Error Error Error Error
Acceleration/
deceleration time
Error Error Error Error
Home
return
startup speed Error Error Error
No applicable condition
target speed Error Error Error
Acceleration/
deceleration time
Error Error
JOG
operation
startup speed Error Error
target speed Error Error Error Error Error Error
Acceleration/
deceleration time
Error Error
Pulser
input
operation
startup speed
No applicable condition
target speed Error Error Error
Acceleration/
deceleration time
Not applicable condition
Operation when above error occurs Operation does not begin Deceleration stop