RPX Technologies DynaVibe Classic, Руководство пользователя

Страница: 19 / 28

16
Guide to Dynamic Balancing V1.09
WWW.RPXTECH.COM
For instance, if in the above example, one AN970 washer is added at the 270
degree position and the system is run again, it is likely that the readout would
be 0.17IPS @ 90°. This gives a good indication that the single washer
corrected approximately 0.07IPS of vibration. While this would imply that
one could quickly add two additional washers to correct the system down to
0.03IPS, it usually isn’t that simple.
Take small steps and document as you go.
Showing the phase angle relative to the master blade.