RPX Technologies DynaVibe Classic, Руководство пользователя

Страница: 12 / 28

9
Guide to Dynamic Balancing V1.09
WWW.RPXTECH.COM
Relationship between optical pickup, accelerometer, and propeller.
Showing a typical installation for a Lycoming engine.
The optical sensor should be at least 6” from the reflective tape, but not so far
that the optical sensor cannot obtain a reading from the tape.
Mount Reflective Tape on the Propeller
By placing the small piece of reflective tape (provided in the kit), on only one
propeller, that propeller can now be considered the “Master” blade. Cut off
approximately 2 inches of tape from the provided roll. Position the tape such
that the optical pickup strikes the reflective tape and turns on the small light at
the back of the optical pickup