RPB PX5 PAPR, Инструкция по эксплуатации

Страница: 11 / 32

11
RESPIRATOR SETUP AND CARE
BATTERY PACK
To reduce the risk of battery fire, explosion, fire, or electric shock
with the charger, follow these precautions and procedures:
Before charging
 Allow the battery to cool before charging if it feels hot.
 Inspect the battery pack before every charge. If there are any cracks or damage do not
charge the battery pack.
 Inspect the charger and power cords before use. Replace if any parts are damaged. Do not
substitute, modify or add parts to the chargers. Do not attempt to service the chargers. There
are no user-serviceable parts inside.
 Use only the provided charger and cord.
Where to charge
Charge only:

indoors,
 in a dry area,

away from sources of heat,
 away from anything that can burn if exposed to heat or flame,

in a well-ventilated place,
 where the charger can be monitored and easily observed during charging.
Battery care
 Do not use the battery outside the recommended temperature limits -4°F to 122°F
(-20°C to +50°C).
 Do not charge the battery outside the recommended temperature limits 32° F to 113° F
(0° C to 45° C).
 Do not store the battery outside the recommended temperature limits -4° F to 104° F
(-20° C to 40° C).
Do not disassemble or immerse the battery or charger in water or other liquids.
The battery can short if the contacts are accidentally connected by metal other than the PX5
®
or the charger. To reset the battery, place the battery on the charging station. The battery will
be ready to use again. While measures have been taken to protect the battery, damage can still
occur, so be careful not to short any contacts together.
For mounting battery chargers to DIN rail, purchase the desired length from any electrical supply
company “Top Hat Rail IEC/EN 60715” 35mm tall. 7.5 or 15 mm depth rail can be used.
See
“INSTALL BATTERY CHARGER ON A WALL” section for more instructions.
Disposal
Dispose of battery packs according to local regulations. Do not crush, disassemble, dispose of in
standard waste bins, in a fire, or send for incineration. Failure to properly dispose of battery packs
may lead to environmental contamination, fire or explosion.
WARNING