RPB PX5 PAPR, Инструкция по эксплуатации

Страница: 17 / 32

17
1 2
Mount the 03-892 HE Filter into the PX5
®
by placing the tabs through the slots in the
top edge of the PX5
®
filter area and rotate
the filter down until the bottom tab snaps into
place. Check that both tabs on the filter latch
are secure.
Orient the filter door with the handle cutout
towards the top, opposite the battery door.
Reattach the filter door by placing the door
over the unit with filter in place and pressing
on top (1) and bottom (2) until firm. You should
hear a click and there should be little to no
gap visible when clipped.
TO INSTALL THE HIGH EFFICIENCY FILTER AND PREFILTER
FIGURE 3.1
FIGURE 3.3
The PX5 ® filter
doors will not attach without a filter in
place. Never use the PAPR without a
filter in place.
WARNING
The prefilter can be attached to the HE Filter
before or after the filters are installed onto the
PAPR. Secure the prefilter onto the top tab (1.)
on the HE filter and then over the bottom tabs
(2.) on the bottom of the HE filter.
FIGURE 3.2
1
2