RPB PX5 PAPR, Инструкция по эксплуатации

Страница: 18 / 32

18
PX5 PAPR
®
TO INSTALL/REPLACE THE SPARK ARRESTOR
Remove the green spark arrester cover by
removing the filter door and then pushing up
on the tabs that hold the spark arrester cover
in place. Place the filter door back onto the the PX5 ® .
Secure the spark arrestor under the tabs on
the front of the filter door.
FIGURE 4.1 FIGURE 4.2
Reattach the spark arrester cover by rotating
the tabs on the top into the slots in the filter
door (1). Rotate the cover down until it clips in
securely at the bottom (2).
FIGURE 4.3
1
2
RESPIRATOR SETUP AND CARE CONTINUED