BACK
FRONT
FRONT
1.
Non-Slip Grip
2. Handle
Fastener
3.
Extra Belt Storage
4.
Hepa Filter
5.
Headlight
6.
Edge Cleaning Bristles
7.
Scuff Guard™ Bumper
8.
Height Adjustment Knob
9.
Full Bag Indicator
10. Carry Handle
BACK
16. Hose Caddy
11. Crevice Tool (in extension wand)
12. Cord Guide
13. Extension Wand
14. Stretch Hose
15. Quick Cord Release
16. Upholstery Tool
17. Dust Brush
18. Power Cord
19. Handle Release Pedal
20. Power Pedal
21. Hose Wand
22. Bag Compartment
23. Bag Release Lever
24. Bag Compartment Handle
FEATURES
1
2
3
4
5
6
7
8
9
10
11
14
15
18
17
19
20
21
22
24
23
16
12
13
5
TOOL REQUIRED: PHILLIPS SCREWDRIVER
HOW TO ASSEMBLE
Gently push midsection
onto base. The midsection
guides go into the nozzle
slots.
1
2
3
4
1.
Insert the four (4) screws
into the hole openings.
Three screw holes are
located inside bag chamber.
The fourth screw hole is
located underneath bag
chamber opening (4).
Secure by tightening the
screws with a Phillips
screwdriver.
2.
Push upper handle onto
upright, aligning upper
handle with handle
opening.
3.
Insert the ONE screw into
hole located on the back
of handle. Insert plastic
fastener into front of handle.
Hold the fastener in place
when tightening.
4.
Place the bag compartment
onto the back of cleaner.
Insert tabs at bottom into
grooves (located on back
bottom of body). Gently snap
panel into place.
5.
Place the upholstery tool
and the dusting brush into
their locations.
6.
Snap the extension wand (with
crevice tool located inside) onto
the back of upper handle.
7.
6
LIST OF PARTS NEEDED:
1 handle screw
4 body screws
1 fastener
