Royal Vibe M091020V, Руководство пользователя

Страница: 5 / 18

9
To replace: Insert HEPA filter
into housing (gasket on
inside) and push into place.
Secure the one (1) screw at
the top of filter cover.
6.
Lift filter cover back into place.
5.
4.
HEPA FILTER REMOVAL & REPLACEMENT: CONTINUED
BELT STORAGE
BELT OR BRUSHROLL: REMOVAL & REPLACEMENT
12
BELT STYLE
For Belt Style 12 replacements, please call 1-800-321-1134 or visit our website at
www.royalvacuums.com to locate a dealer nearest you.
Flip cleaner to expose nozzle base.
Base should lay flat and face up. To
remove nozzle guard, use Phillips
screwdriver to remove the six (6)
screws. Arrows show location of
screws. Lift nozzle guard off. Slide old belt off motor shaft.
Dispose of old belt.
3.
Lift and remove brushroll.
2.
1.
TOOL REQUIRED: PHILLIPS SCREWDRIVER
Loosen the one (1) screw
located at the top of filter
cover.
1.
Gently lower filter
cover from body.
2.
Belt is stored on the inside
of the filter cover on top.
Remove and replace with
another NEW belt.
3.
Replace filter cover.
Secure the one (1) screw
at the top of filter cover.
4.
TOOL REQUIRED: PHILLIPS SCREWDRIVER
Belt, part # 3-910340-600, is located on the side of cleaner.
10
Place belt on motor shaft,
then slip brushroll through
belt. Place belt in area of
brushroll without bristles. With belt in place, pull and slide
brushroll into nozzle making
sure that the brushroll end caps
are in the correct orientation
(5a).
IMPORTANT: ROTATE
BRUSHROLL MANUALLY TO
MAKE SURE BELT IS NOT
TWISTED.
4.
Reattach nozzle guard. Secure by
replacing the six (6) screws.
BELT OR BRUSHROLL REMOVAL & REPLACEMENT: CONTINUED
5.
5a.
4a.
6.
GENERAL MAINTENANCE
TOOL REQUIRED: PHILLIPS SCREWDRIVER
NOTE: Unplug cleaner before checking dirt path or filter.
Pull release lever
and lift to remove
bag compartment.
1.
Unscrew the two (2)
screws located on the
inside of the cleaner.
2.
Remove the access panel
and remove all visible
debris.
3.
Replace access panel.
Secure by replacing the two
(2) screws (4). Return bag
compartment to its position
(4a).
4.
DIRT PATH MAINTENENCE
Pull release lever on the bag
compartment. Pull away
from cleaner.
1.
Remove filter and shake out
loose dirt. Replace filter. Replace bag compartment.
For filter replacement part
#1-910115-000, please
call 1-800-321-1134.
3.
FILTER MAINTENENCE
2.