Royal Vendors RVV 700, Руководство по эксплуатации и обслуживанию

Страница: 40 / 76

RVV 700 Standard Programming Service and Parts Manual
40
SECTION 4: Vender Maintenance
Vender Maintenance
What to Clean
CAUTION: Electrical and electronic components should
NEVER be subjected to water.
Belts:
The belts should always be kept clean and free
of debris to ensure efficient operation, as well as to extend
the life of the belts.
Cells:
Make sure the cells are free of dirt, syrup, and
debris. Build-up of foreign material, especially syrup from
broken or leaking packages, can cause the cell to stick and
adversely affect the cell’s performance. Use warm soapy
water or other food grade cleaning agents to maintain a
clean smooth surface. Also make sure that the cells are
level and seated properly in the tracks that they slide into.
Condenser and Evaporator Coils:
For
efficient operation, the condenser and evaporator coils
must be kept clear of any dirt or foreign materials. Clean
dirt and debris from the condenser and evaporator coils
with a small light-bristled brush, vacuum cleaner, or
compressed air. This will help to ensure an extended unit
life.
VMC:
The vender’s control board (VMC) should always
be enclosed by its cover to protect it. Routine cleaning is
not necessary but, if desired, the board area may be blown
out with compressed air.
Delivery Bin:
Make sure that the delivery bin
remains clean and free of any debris or other objects that
may block the optic sensors. Bottles sometimes have
a tendency to lose their labels, which may be left in the
delivery bin. If objects are left in the bin and the sensors
are blocked, the board will assume there is a package in
the bin and will not deliver product to the bin.
Elevator Arm and Cup Tracks:
The elevator
arm and cup assemblies travel in aluminum tracks that
guide these components. Make sure that these tracks are
kept clean and free from foreign material such as dirt,
syrup, or other debris. Use a wet cloth to wipe these tracks
clean. Avoid using any type of silicone or lubricant, as
they may tend to collect dirt and will adversely affect
performance.
Product Cup:
The cup floor should be kept clean
and free of syrup.
Lubrication
Latch Strike Nut:
The latch strike nut should be
lubricated.
Refrigeration Unit:
The refrigeration unit is a
sealed system that does not require any lubrication. Also,
the condenser and evaporator fan motors do not require
any lubrication.
Preventive Maintenance
Vender Leveling:
Make sure that the vender is
level when placed on site. If the vender is not properly
leveled it can begin to accumulate standing water, which
over a period of time may begin to freeze and will
eventually freeze the evaporator. Another problem that
may occur from an unleveled vender will be improper
vending, which would include but not be limited to
product not vending from cell, product vending slowly
from cell, product not being delivered to the delivery bin,
or product jamming.