Royal Vendors RVV 700, Руководство по эксплуатации и обслуживанию

Страница: 28 / 76

RVV 700 Standard Programming Service and Parts Manual
28
SECTION 3: Vender Programming
Configurations
If <enter> is pressed at the “Configurations” prompt, the
controller will enter the machine configuration mode by
displaying “CN Configuration Name”, followed by a
box (checked if enabled, empty if disabled). Using <up>
or <down> will allow you to cycle through all available
configuration options. If <exit> is pressed anytime
during this operation the controller will return to the
“Configurations” prompt. From the “Configurations”
prompt, use <up> to proceed to the next prompt, “Correct
Change”.
If <enter> is pressed the status will toggle between enabled
and disabled. When the desired status is displayed,
pressing <enter> will save that status. Press <up> or
<down> to scroll through the available configurations.
• C2 - Optional Features Enable
This option is used to enable the optional menu, which
contains several more mode options than available in the
standard service menu. If this configuration is unchecked,
all optional menu items will be disabled.
Unchecked: optional menu items will not appear.
Checked: optional menu items will appear.
• C3 - POS Disable
This option is used to turn off the display of the point-of-
sales message.
Unchecked: the point-of-sales greeting will appear as
normal.
Checked: the point-of-sales greeting will not appear on
the display.
• C4 - Summary MIS Data Display
This option is used to turn on the display of the total
machine sales and total machine cash values in the open-
door mode.
Unchecked: only recorded error codes are displayed when
the door is open.
Checked: sales and cash totals will be displayed, as well
as recorded error codes.
• C5 - Door Switch MIS Reset
This option is used to allow the door switch to reset all
resettable MIS.
Unchecked: all resettable MIS registers are reset only
when the “CF” command is received from a Hand-Held
Computer (HHC).
Checked: all resettable MIS registers are reset when
the door switch is sensed as open and at least one of the
resettable MIS registers has been read (i.e., cash and sales
counts).
• C7 - Save Credit
This option is used to determine how long credit should
remain on the display and available to the customer. If the
feature is turned off, a five-minute timer is restarted each
time credit is added to the machine, or any valid consumer
action occurs. After the timer expires the credit is erased.
If the feature is turned on, credit is left available to the
customer regardless of when it was deposited.
Unchecked: the five-minute timer is used.
Checked: credit is left on the display for use indefinitely.
• C8 - Force Vend
This option prevents the machine from becoming a change
maker. When this mode is enabled, escrow of coins is
allowed until any of the following three events occurs: 1.
Any bill is inserted into the bill acceptor; 2. Any “cash
box” coin is inserted into the changer; or 3. The maximum
vend price is reached. Once any of these conditions are
met, any accumulated credit must be used toward a vend
attempt, and coins will not be dispensed for credit in
response to an escrow request. If a sold-out selection, or
if a valid selection that becomes sold-out, is made, this
option will be overridden, and an escrow will be honored.
Unchecked: forced vend attempt is disabled.
Checked: forced vend attempt is enabled.
Note that forced vend attempt has no effect on the card
reader. Once a card is inserted, it can always be returned to
the customer via the escrow lever on the changer or return
button on the card reader.
• C9 - Multi-Vend
This option will allow multiple purchases without
re-entering coins. If enabled, instead of immediately
returning the change after a vend, the credit will remain
on the display to be used for another selection. An escrow
request will be honored at any time. This option will take
precedence over the forced-vend option after the first vend
has been completed.
Unchecked: multi-vend is disabled.
Checked: multi-vend is enabled.
• C10 - Bill Escrow Inhibit
This option will inhibit escrowing of bills. If disabled, and
the current bill value inserted takes the accumulated credit
over the maximum price, the bill will be held in the escrow
position. If the rule is enabled, bills will always go to the
cash box.
Unchecked: bill escrow is allowed.
Checked: bill escrow is inhibited.