Royal Vendors RVV 700, Руководство по эксплуатации и обслуживанию

Страница: 26 / 76

RVV 700 Standard Programming Service and Parts Manual
26
SECTION 3: Vender Programming
Discount Counters
If <enter> is pressed at the “Discount Counters” prompt,
the controller will enter the discount counter display mode
by displaying three lines: “Total” on the first line, “Vends
XXXX” on the second line, and “Value YYYY.YY” on the
third line. “Discount Counters” functions exactly as “Card
Counters” does, except that it counts discounted vends
instead of card vends. (See above.) If <exit> is pressed
anytime during this operation, the controller will return to
the “Discount Counters” prompt. Press <up> to proceed to
the next prompt, “Free Vend Accounting”.
Free Vend Accounting
If <enter> is pressed at the “Free Vend Accounting”
prompt, the controller will enter the token counter display
mode by displaying three lines: “Total” on the first line,
“Vends XXXX” on the second line, and “Value YYYY.
YY” on the third line. “Free Vend Accounting” functions
exactly as “Card Counters” does, except that it counts
free vends instead of card vends. (See above.) If <exit> is
pressed anytime during this operation, the controller will
return to the “Free Vend Accounting” prompt. Press <up>
to proceed to the next prompt, “Set Prices”.
Set Prices
If <enter> is pressed at the “Set Prices” prompt, the
controller will enter the price setting mode. If multiple
prices are enabled in “Configurations”, the display will
show “All”, “Shelf”, and “Selection”. Press <up> or
<down> to cycle through these options. If multi-price is
disabled, only “All” will be shown after pressing <enter>
at the “Set Prices” prompt.
If <enter> is pressed at “All”, this item and the current
price for all selections will be highlighted. To change
this universal price, type in the desired price using the
keypad. Once the desired price is shown, press <enter> to
save it and return the display to the unhighlighted state.
If multi-price is enabled, use <up> to proceed to the next
menu item, “Shelf”. If multi-price is disabled, use <exit>
to return to the “Set Prices” prompt, then press <up> to
proceed to the next prompt, “Space to Sales”.
If <enter> is pressed at “Shelf”, each shelf number will
be displayed, followed by the current universal price
for the shelf. Press <up> or < down> to cycle through
each individual shelf number. If <enter> is pressed at a
particular shelf number, that shelf and its current price
setting will be highlighted. To change this price, type in
the desired price using the keypad. Once the desired price
is shown, press <enter> to save it and return the display to
the unhighlighted state. Once all shelf prices have been set,
press <exit> to return to the “Shelf” prompt. Press <up> to
proceed to the next menu item, “Selection”.
If <enter> is pressed at “Selection”, each selection number
will be displayed, followed by its current set price.
Press <up> or < down> to cycle through each individual
selection number. If <enter> is pressed at a particular
selection number, that selection and its current price
setting will be highlighted. To change this price, type in
the desired price using the keypad. Once the desired price
is shown, press <enter> to save it and return the display
to the unhighlighted state. Press <exit> to return to the
“Selection” prompt, then press <exit> a second time to
return to the “Set Prices” prompt. Press <up> to proceed
to the next available prompt, “Space to Sales”.
Space to Sales
If <enter> is pressed at the “Space to Sales” prompt, the
controller will enter the space-to-sales programming
mode. Use <up> or <down> to scroll between the various
space-to-sales options. The following options are available
within this menu:
One-to-One
By Half-Rows
By Rows
Custom
Vend Evenly
One-to-One, By Half-Rows, and By Rows
Once the desired option is reached, press <enter> to save
that option, then <up> or <down> to scroll through the
remaining menu items or <exit> to return to the “Space to
Sales” prompt.
Custom
If <enter> is pressed at the “Custom” prompt, you will
have the opportunity to program a custom space to sales
configuration. Upon entry into this routine, the display
will show “Clear Selections” and “Go to Selection”.
Pressing <exit> at this point will return the display to the
“Custom” prompt with no changes being made.
To clear the current space-to-sales assignments, press
<enter> at the “Clear Selections” prompt, and the third
row of text on the display will show “Unassigned Cells
All”. From “Clear Selections”, press <down> to scroll to
“Go to Selection”.