ROYAL PRESTIGE
®
JUICER
22
CONDITION
REASON
SOLUTION
During juicing, the
Juicer stopped
If too many ingredients are
inserted at one time, this can
cause the Juicer
to stop.
The Juicer stops due to the
overload protection.
Hard seeds can damage the
Juicer .
• Check the power cord and make sure it is
plugged in correctly.
• Check that all the parts are correctly assembled.
• Press the REVERSE - OFF - FORWARD button in this
order, switching back and forth 2 to 3 times.
• The REVERSE setting will push the ingredients
up, and the FORWARD setting will pull the
ingredients down.
• Let it cool for 30 minutes to 2 hours before
juicing again.
• If there are hard seeds within the ingredients,
remove them before juicing.
The Feed tube is stuck
If there is too much pulp in the
top-set, this can cause the feed
tube to not open.
• After juicing, let the Juicer operate for another 30
seconds to extract the remaining pulp.
• In this situation, press the REVERSE OFF - FORWARD
button in this order, switching back and forth
2 to 3 times.
• Pour water down the feed tube to rinse out the
inside and then try opening it.
Fibers are
wrapping around
the screw and are
affecting performance
Ingredients with tough, long
fibers are more difficult to juice
• When juicing fibrous ingredients, do not collect
more than 0.5 liter ( approx. 2 ¼ cups) of juice. After
collecting this quantity or less, clean the top-set
completely before juicing again
