ROYAL PRESTIGE
®
JUICER
19
How to Use the Rotating Brush
The rotating brush makes clean-up quick and easy. Completely dry after cleaning.
Tip:
Note:
Use the included Cleaning Brush to remove hard-to-reach bits after using the rotating brush.
Thoroughly rinse the inside and outside of the strainer
under running water.
Hold the rotating brush with one hand and insert the
strainer into the brush.
NOTE:
Insert the Strainer until you hear a click
1
Under running water, rotate the rotating brush and the
strainer in opposite directions to clean.
2
3
After cleaning, remove the strainer from the rotating
brush. Dry before storing.
4
21
20
HOW TO USE THE CLEANING TOOL
Hold the cleaning tool with one hand and insert
the strainer into the cleaning tool.
HOW TO CLEAN SILICONE PARTS
Silicone Brush
Pull out the silicone brush from
the rotation wiper to clean.
After cleaning, insert into the slot
with the tail pointing down as
shown in the illustration.
Silicone Ring
Remove the silicone ring from
strainer to clean.
After cleaning, push in the silicone
ring.
Smart Cap
Remove from the juice spout
to clean.
After cleaning, attach the smart
cap to the smart cap silicone on
the juice spout.
Clean the rotation wiper under running water.
Thoroughly dry after cleaning. Before assembling the top-set, ensure that the silicone ring is
firmly inserted.
If the silicone ring is not firmly inserted, juice may leak from the bottom of the juicing bowl.
Tip |
Note |
The cleaning tool makes clean-up quick and easy.
Completely dry after cleaning.
Tip |
1
After cleaning, remove the strainer from the
cleaning tool. Dry before storing.
4
Under running water, rotate the cleaning tool
and the strainer in opposite directions to clean.
2
Thoroughly rinse the inside and outside of
the strainer under running water.
3
Note |
Insert the strainer until you hear a click.
* The products illustrated in this booklet may vary slightly from the actual product.
Cleaning inside of the bowl
Please unscrew the cover on the bottom and clean inside.
After cleaning, make sure that protrusion part of gear is
placed on the outer part so it fits (connects) with the drum.
Sequence of assembly is in reverse order of disassembly.