ROYAL PRESTIGE
®
JUICER
21
CONDITION
REASON
SOLUTION
The Feed tube
will not close
The screw may not be
properly inserted.
• Make sure the screw is pushed all the
way into the Strainer for the Feed tube to close
properly.
Odd noise from
the Juicer
Check if the parts are
assembled correctly.
Operating the Juicer without
ingredients can cause damage to
the screw.
If the size of ingredients is too
large, friction noise
will occur.
The noise can occur if the Juicer
is operated on an uneven or
slanted surface.
• Try reassembling the parts and listen for the
odd noise.
• Do not start the Juicer unless there are ingredients
and/or liquid in it.
• The friction noise from the screw and the
Strainer will cease when ingredients are inserted
into the Juicer .
• Check the size of the ingredients.
• Place the Juicer on a horizontally flat surface when
operating.
The extracted pulp is
very moist
During the very beginning
of extraction, the pulp can
be moister.
Depending on the ingredient’s
condition, especially when the
ingredient is not fresh, the juice
can be extracted with the pulp.
Select fresh ingredients.
During operation, the
bowl shakes
The screw and the Strainer are
set up to crush and squeeze the
ingredients. It is normal for the
screw and the Strainer to vibrate.
If the ingredient contains strong
fiber, the vibration from the
Top-set may be stronger.
No action is required.
Layers of
separation in the juice
Depending on the density of the
ingredients, the extracted juice
may show layers of different
juices. It is different from
separation due to oxidation
caused by juicing with a
high-speed Juicer .
No action is required.
