Royal Alloy GP300S страница 3 Скачать руководство пользователя

Страница: 3 / 44

Congratulations on your purchase of the Royal Alloy GP300S!

Please read this manual carefully prior to riding so that you will understand how to safely operate your scooter,

understand its capabilities and limitations, and become aware of all vehicle controls and features.

This owner's manual contains important maintenance information. The efficiency and longevity of your scooter

will depend heavily on your operating methods and periodic maintenance. Failure to operate and maintain your

scooter as instructed in this owner's manual may void the limited warranty and reduce the efficiency and reliability

of your vehicle.

The first 500 miles are the most important in the life of your scooter. Proper break-in during this time will ensure

maximum life. Please refer to the break-in section for specific break-in procedures prior to riding.

You should always use original Royal Alloy OEM parts for all maintenance and repairs as they have been

designed specifically for your vehicle.

Genuine Motor Oil is the official lubricant of Royal Alloy vehicles. Genuine Motor Oils have been specially

formulated to keep your vehicle operating at maximum efficiency with minimal engine wear. Genuine Motor Oils

are synthetic oils that utilize the best-known lubrication technology to increase fuel mileage and produce minimum

exhaust emissions.

Your authorized Royal Alloy dealer is the primary resource for information, parts, and service. If you

have any questions, please ask your dealer for assistance.

Introduction

Содержание GP300S













































Результаты поиска

Содержание GP300S

Отзывы:

Похожие инструкции для GP300S

Бренды по названию

Популярные бренды

Royal Alloy GP300S, Руководство пользователя

Результаты поиска

Содержание GP300S

Отзывы:

Похожие инструкции для GP300S

Бренды по названию

Популярные бренды