Royal Alloy GP300S страница 5 Скачать руководство пользователя

Страница: 5 / 44

Accessories

The addition of unsuitable accessories can result in unsafe

operating conditions.
Royal Alloy approved accessories have been designed for

use on your scooter. Always install Royal Alloy approved

accessories on your scooter. Your dealer can assist you in

selecting and properly installing accessories.

Modification

Modification of your scooter or removal of original

equipment may render the vehicle unsafe or illegal. Do not

install any part or component where the principal effect is to

bypass, defeat, or render inoperative any device or element

of design installed on or in a motor vehicle or motor vehicle

engine in compliance with regulations. Obey all applicable

equipment laws and regulations. Only use accessories that

have been approved by Royal Alloy for this scooter.

Motorcycle Noise Regulation

TAMPERING WITH NOISE CONTROL SYSTEM PROHIBITED
Federal law prohibits the following acts or the causing thereof: (1)

The removal or rendering inoperative by any person other than for

purposes of maintenance, repair, or replacement of any device or

element of design incorporated into any new vehicle for the

purpose of noise control prior to its sale or delivery to the ultimate

purchaser or while it is in use or (2) the use of the vehicle after

such device or element of design has been removed or rendered

inoperative by any person.

AMONG THOSE ACTS PRESUMED TO CONSTITUTE

TAMPERING ARE THE ACTS LISTED BELOW.

These acts include tampering with the following systems, i.e.,

modification, removal, etc.

Exhaust System - Muffler, Exhaust pipe, Silencer

Intake System - Air cleaner case, Air filter, Intake duct.

Vehicle Safety

Содержание GP300S













































Результаты поиска

Содержание GP300S

Отзывы:

Похожие инструкции для GP300S

Бренды по названию

Популярные бренды

Royal Alloy GP300S, Руководство пользователя

Результаты поиска

Содержание GP300S

Отзывы:

Похожие инструкции для GP300S

Бренды по названию

Популярные бренды