Operation
27
Vehicle Operation
Before starting your vehicle, you should be familiar with
all operations and functions of this vehicle. You should
have completed the pre-ride inspection, and you should
be wearing safety gear.
If this is the first time you are operating your vehicle, you
should thoroughly review the "Initial Engine Run-In"
section on the next page.
It is recommended to warm up the engine for a few
minutes prior to riding. This will prevent components from
experiencing premature wear.
Vehicle Start
1)
Ensure the kill switch is in the RUN position.
2)
Ensure the side stand is in the upright position.
3)
Insert the key into the Ignition Switch and turn to ON.
4)
With the throttle completely closed, pull in either brake
lever & simultaneously push and hold the start button.
Once the engine starts, release the start button.
Do not press and hold start button for more than 5
seconds at a time as this can damage the start system. If
the vehicle has difficulty starting after pressing the start
button for 5 seconds, release the start button. Wait 10
seconds between attempts. Try to start the vehicle again
for up to 5 seconds at a time.
WARNING: The rear wheel of the scooter may start to
spin once the scooter starts. Make sure you keep your
body and any loose clothing away from the rear wheel to
avoid injury.
WARNING
WARNING: Carbon monoxide gas is toxic. Breathing
carbon monoxide can cause unconsciousness and even
kill you. Avoid running your engine within enclosed
areas and other activities that expose you to carbon
monoxide.
WARNING
