7
SAVE THESE INSTRUCTIONS
Any commercial use, inappropriate
use or failure to comply with the
instructions, the manufacturer ac-
cepts no responsibility and the gua-
rantee will not apply.
For your safety, this appliance
conforms to the applicable stan-
dards and regulations (Low Voltage,
Electomagnetic Compatibility, Envi-
ronmental Directives, as applica-
ble…).
Your Pro Precision steam station is
an electrical appliance: it must be
used in normal conditions of use.
It is fitted with 2 safety systems:
- A pressure release valve which, in
the event of a malfunction,
releases any excess steam.
- A thermal fuse to prevent the
appliance from overheating.
Always plug your Pro Precision
steam station into:
- An electrical installation with
voltage 120V.
Connecting to the wrong voltage
may cause irreparable damage to
the appliance and will invalidate
your guarantee.
- The appliance must not be left
unattended while it is connected to
the outlet.
- The plug must be removed from
the outlet before the water
reservoir is filled with water.
- The appliance must be used and
rested on a stable surface.
- When placing the appliance on its
stand, ensure that the surface on
which the stand is placed is stable.
- The appliance is not to be used if
it has been dropped, if there are
visible signs of damage or if it is
leaking.
- If the supply cord is damaged, it
must
be
replaced
by
the
manufacturer, its service agent or
similarly qualified person in order
to avoid a hazard.
- This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of
the
appliance
by
a
person
responsible for their safety.
- Children should be supervised to
ensure that they do not play with
the appliance.
- Do not direct steam at people,
animals or iron clothes while they
are being worn.
- “Calc Away-System”:
Always
wait before rinsing the collector
until the steam station has cooled
down and has been unplugged for
at least 2 hours before unscrewing
the collector.
If you lose or damage the scale
collector, have it replaced by
calling
Rowenta
Consumer
Services.
- Never attempt to unscrew the
scale collector while the appliance
is in use. The strong steam
pressure could results in burns.
Only unscrew the collector when
the appliance is cold (2 hours) or
there is no more pressure in the
boiler.
EN
1800133852 DG8510-20 U0_110x154 26/06/14 15:28 Page7
