Roving Networks RN-131C Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 68

background image

WiFly GSX

www.rovingnetworks.com

WiFlyGSX-um 9/16/2010

809 University Avenue

•

Los Gatos, CA 95032

•

Tel (408) 395-6539

•

[email protected]

~ 16 ~

5.7.

Optional Parameters

set opt jointmr <msecs>

Join timer is the time in milliseconds (default=1000) the join function will
wait for the an access point to complete the association process. This timer
is also the timeout for the WPA handshaking process.

set option sensor <mask>

Bitmask value that determines which sensor pins to sample when sending
data using the UDP broadcast packet and the HTTP auto sample function.

set opt format <mask>

settings for HTTP client/web server value is a bitmapped register. Refer to
section 13 for more details.

set opt replace <char>

replacement character for spaces.  The replacement character is used when
entering SSID and pass phrases that include space.  This is used by the
WiFly GSX command parser only.  Each occurrence of the replacement
character is changed into a space.  The default is “$” (0x24)

set opt deviceid <string>

Configurable Device ID - can be used for storing serial numbers, product
name or other device information.  This information is sent as part of the
broadcast hello packet that is sent as a UDP.  The current value can be
shown with the “get option” or “show deviceid” commands.  Max string
size is 32 bytes. The default is “WiFly-GSX”.

set opt password <string>

TCP connection password.  Provides minimal authentication by requiring
any remote device that connects to send and match a challenge <string>.
When set, all newly opened connections must first send the exact
characters that match the stored password otherwise the WiFly module
will close the connection.  When the password is set the WiFly module
sends the string “PASS?” to the remote host.  All characters in the string
must be sent in one TCP packet.  Max string size is 32 bytes. To disable
the password feature use string=0 which is the default.

Bit

Function

0

Automatically send HTML data header based on broadcast

interval.

1

Send users BINARY data (converted to ASCII hex )

2

Sample the GPIO and AtoD pins and format to ASCII hex

3

Appends

&id= <

the value of the deviceid string set with “set opt

device <string>”>

4

Appends &rtc= <real time clock value in message as 32 bit HEX

value in format aabbccddeeff>

«
...
14
15
16
17
18
...
»

Содержание RN-131C





































































Отзывы:

Нет отзывов

Похожие инструкции для RN-131C

FEPL-02 Ethernet POWERLINK

Бренд: ABB Страницы: 2

Бренд: ABB Страницы: 2

Бренд: IBM Страницы: 12

Бренд: K&K Страницы: 10

Бренд: Galaxy Control Systems Страницы: 5

Бренд: Quectel Страницы: 90

Бренд: Rain Bird Страницы: 20

Tissue-Tek TEC 6

Бренд: Sakura Seiki Страницы: 6

Бренд: µ-Dimension Страницы: 48

Бренд: µ-Dimension Страницы: 2

EP Series Pro-Bloc

Бренд: Parker Страницы: 11

Бренд: Parker Страницы: 22

Бренд: Parker Страницы: 2

Бренд: POLA Страницы: 2

Бренд: Elotech Страницы: 20

Бренд: Intermatic Страницы: 2

Бренд: MX Страницы: 12

Бренд: Case IH Страницы: 81

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды