14/74
Configuring the HD PRO TAB
5. Meter’s basic parameters
Pressing the CONFIG button on the front panel keyboard will display the basic settings menu.
By default,
VOLUME
is selected (as shown in figure), thus rotating the mechanical wheel will
result in increasing or decreasing the audio volume; rotating the wheel clockwise, you will see
the white cursor moving up; conversely, rotating counter-clockwise, the cursor will move down
the volume bar.
Note:
the same process can be done using the touch screen: touching the bar on the
right side of the cursor will increase the volume; touching it on the left side of the
cursor, will decrease the volume.
Touching each parameter of the menu, will result in entering the edition mode, thus
being able to change the parameter’s value. For “ON/OFF” parameters, touching the
actual value will result in toggling it to its opposite (ON
!
OFF; INT
!
EXT; etc)
Pressing once the mechanical wheel will confirm the configuration and place the orange
selector on VOLUME, ready to be moved on the next parameter to adjust.
BRIGHTNESS
configuration follows exactly the same principle explained for VOLUME. The
cursor can be moved up or down the bar to adjust screen brightness.
Содержание HD PRO TAB
