Rover HD PRO TAB, Руководство пользователя

Страница: 27 / 74

27/74
For DVB-S2 Multi-stream signals the Meter let the user select which ISI should be
demodulated from the signal. By default the meter demodulates the ISI #1. The selection
could be done via the “MENU&?” contextual menu:
Once selected the ISI of interest, the meter will automatically demodulate it, providing the
constellation and other ISI-dependent modulation information, as well as the service list.
In the contextual menu is also possible to set /change the value of the Local Oscillator (in
MHz) and to access to the
Channel Logger and the Visualize NIT functions.
The channel logger allows the user to visualize and record RF measurements for the tuned
channel. Depending on which is the selected time span (from 30 min to 7 days) the refresh
speed of the diagram may vary. It is also possible to save the logger to an external USB
mass drive, connected on the USB-A port on the top panel. Once the USB device has been
plugged, vie the contextual menu is possible to define the filename and start logging the
measurements.