5
VERTICAL CONTACT TOASTER
P/N 1011233 Rev. B 09/13
Heat Shield
Conveyor
Cover (Rear)
Conveyor
Cover (Front)
Bun Chute
Silicone
Belt
Release
Sheet
Control Panel
and Power Switch
Roller
Tensioner
Conveyor
Belt
Chain
LIGHTER
PROGRAM
DARKE
R
Dimensions
SPECIFICATIONS
Electrical Ratings
Electrical Cord & Plug Configurations
Model &
Mfg. No.
Description
Configuration
VCT-2010
9210318
Power Cord
Assembly
20 Amp, 250 Volt
Right Angle
VCT-2010
9210319
16 Amp, 250 Volt
CEE 7/7 Plug
Model &
Mfg. No.
Volts
Watts
Amp.
Hz.
VCT-2010
9210318
208
3300
15.8
50/60
VCT-2010
9210319
230
3300
14.4
50/60
Model &
Mfg. No.
Width
(A)
Depth
(B)
Height
(C)
VCT-2010
9210318
9210319
20”
(508 mm)
15 1/4”
(387 mm)
20”
(508 mm)
CAUTION
Failure to use Release Sheets may result in damage to
the unit and loss of warranty coverage.
WARNING
ELECTRICAL SHOCK HAZARD. FAILURE TO FOLLOW
THE INSTRUCTIONS IN THIS MANUAL COULD RESULT
IN SERIOUS INJURY OR DEATH.
• Electrical ground is required on this appliance.
• Do NOT modify the power cord plug. If it does not fit
the outlet, have a proper outlet installed by a quali-
fied electrician.
• Do NOT use an extension cord with this appliance.
• The toaster should be grounded according to local
electrical codes to prevent the possibility of electrical
shock. It requires a grounded receptacle with separate
electrical lines protected by fuses or a circuit breaker
of the proper rating.
• Check with a qualified electrician if you are unsure if
the appliance is properly grounded.
