Rottler SG10A, Руководство по эксплуатации и обслуживанию

Страница: 27 / 124

Section 3 Safety SG10A Manual
www.rottlermfg.com
3-4
In the event of an electrical short, grounding reduces the risk of electric shock by providing a path of least
resistance to disperse electric current.
Electrocution or a fire can result if the machine is not grounded correctly. Make sure the ground is
connected in accordance with this manual.
DO NOT
operate the machine if it is not grounded.
No single list of electrical guidelines can be comprehensive for all shop
environments. Operating this machinery may require additional electrical
upgrades specific to your shop environment. It is your responsibility to make sure your electrical system
comply with all local codes and ordinances.
This machine operates under computerized control and, as is all computerized
equipment, and is susceptible to extraneous electrical impulses internally for
externally produced. The machine may make moves out of the operator control at any time. The
operator should work in and around the machine with caution at all times.
The operator and nearby personnel should be familiar with the location and operation of the Emergency
Stop Button.
Make sure all electrical equipment has the proper overload protection. This machine should have a fully
isolated power supply to prevent damage and uncontrolled movement of the machine. If this machine
is on the same power lines that are running to other electrical equipment (grinders, welders, and other AC
motors) electrical noise can be induced into this machines electrical system. Electrical noise can cause
the controller to see false signals to move. Not supplying a fully isolated supply to the machine may void
factory warranty. Refer to the Power supply section located in the Installation section for voltage and
amperage requirements of this machine.