RotoSpa DuoSpa S080, Руководство пользователя

Страница: 18 / 36

18
KEYLOCK FUNCTION
How to set full or partial keylock
The keypad buttons can be locked to prevent accidental key presses or to limit access to certain controller
functions. This feature is helpful where children are present or spa is used by many people.
There are two types of keylock:
Full Lock: All buttons are disabled
Partial Lock: Allows use of pumps, blower and light but locks out settings and temperature adjustments
Full Lock
-
Press and hold UP + DOWN + PUMP A until LOCK appears on the
display
-
Once locked if any button is pressed the key stroke will be
ignored and display will show LOCK
- To unlock press and hold UP + DOWN + PUMP A
Partial Lock
- Press and hold UP + DOWN + AUX until LOCK appears on the
display
- Once locked only pumps, blower and light can be used. Other key
strokes will be ignored and display will show LOCK
-
To unlock press and hold UP + DOWN + AUX
AUTO DAILY SANITISE
The controller will automatically run a 10 minute sanitise cycle every day at
9:00am. This sanitisation cycle runs the filtration pump and ozone to filter the pool water to restore and
refresh water quality. If pump 1 is a 2 speed pump the pump will run in high speed for the duration of the
cycle. In addition at the start and end of the cycle the controller will sequentially run any additional accessories
(auxiliary, pump2, pump3 or blower if fitted) for one minute each to purge the plumbing and clear any
unfiltered water trapped in those accessory lines.
NOTES:
1. If the controller is in a programmed sleep period at 9:00am it will wait until the sleep period ends before the daily
sanitise cycle runs.
2. If the spa is in use prior to the 9:00am sanitise cycle start time the cycle is cancelled for the day. Spa in use = button
has been pressed and spa has not had the 45 minute inactivity time out expire since the last button press.