RotoSpa DuoSpa S080, Руководство пользователя

Страница: 7 / 36

7
The appliance must NOT be installed within close proximity to highly flammable materials.
Your Rotospa hot tub is fitted with a two-speed pump and a heater element. Your spa will be factory-
programmed to ensure the system does not exceed its rated maximum total load. Therefore the
heater will automatically turn off when the user sets the pump to run at its higher speed.
In models where a blower unit has been fitted to the spa, the heater will again automatically switch
off when the blower is activated. These load shedding settings can be adjusted, but the factory
settings are recommended. If you wish to alter the settings, contact your spa dealer or Rotospa
directly
.
To prevent damage to your spas heater element, optical and temperature sensors, good water
quality is essential. Chlorine and pH levels must be maintained, and a suitable level of cleanliness to
filters must be maintained so that good water purity can be achieved.
An adequate drainage system must be provided where equipment is to be installed in a pit.