RotoSpa DuoSpa S080, Руководство пользователя

Страница: 20 / 36

20
FILT – Filtration (total hours per day)
Automatic filtration is provided to ensure that the pool water is filtered for at least a minimum number of
hours each day. Total daily runtime can be adjusted from 1-24 hours (default = 2 hours). Total filtration runtime
is broken into smaller blocks which occur every three hours. All time spent running the pump under normal
operation (manual use, heating, sanitise cycle) will be taken into account and where required the pump will
run for additional periods throughout the day to maintain the minimum level of daily filtration as specified by
the user.
SNZE – Sleep Timer
The sleep timer is a very handy feature that enables the user to stop all spa activity and silence the spa
during certain times of day or night. While the controller is sleeping NO automatic heating or filtration
maintenance will occur, however the spa can still be operated by manual use without the need to adjust
sleep time settings. The sleep timer setup consists of defining days of operation and begin time and end time
of sleep period. Use the UP or DOWN button to adjust each setting within the sleep setup and press OK to
confirm and skip to the next setting. Sleep timer settings are referenced in the table below:
TITLE SETTING OPTIONS
1.DAY Selected days of operation Sat-Fri (7 days), Sat-Sun (weekend), Mon-Fri (weekdays), OFF
1.BGN Time sleep period begins Adjustable to any time 0:00 to 23:59 (Default = 22:00 PM)
1.END Time sleep period ends Adjustable to any time 0:00 to 23:59 (Default = 07:00 AM)
Notes:
1. SV Mini is pre-set with a default sleep timer – 7 days a week, begin 22:00 (10PM), end 07:00 (7AM)
2. Set 1.DAY=OFF to disable sleep timer
3. If spa in use at begin time of sleep period, spa will not sleep until 45 min inactivity timeout has elapsed
D.DIS – Default Display
The user can adjust the default display mode to show their preferred selection of either: W.TMP (water
temperature), S.TMP (set temperature) or TIME (current time and day).
WIFI – Wi-Fi Setup
This menu is only of use if the optional SpaNET SmartLINK or SmartSTREAM Wi-Fi module has been installed
and connected to the SV Mini. This menu has three commands that can be executed. Use the UP or DOWN
buttons to select desired command and press the OK button to execute – display will show WAIT whilst the
Wi-Fi module carries out the command.
HOT Puts Wi-Fi module in hot spot mode for initial app setup. Note: Once initial app setup has been
completed if the HOT command is executed again all Wi-Fi settings will be lost and the app setup
process must be run again.
INFR Forces Wi-Fi module to disconnect/reconnect from the SpaNET app server to refresh connection if spa
is not automatically coming online once the app setup process has been completed.
RSET Deletes programmed settings from Wi-Fi module and returns the module to its factory default state.
Note: If this command is executed settings are lost and the app setup process must be run again.