RotoSpa DuoSpa S080, Руководство пользователя

Страница: 11 / 36

11
Make sure all adjustable jet faces are in the ‘on’
position. This can be achieved by turning them anti-
clockwise (as shown, left).
With the exception of the DuoSpa models which have
no waterfall; ensure the waterfall dial is turned on so
that it is ejecting water into the spa when the pump is
running.
This will help to purge the pump and pipework of any
air, relieving the system of airlocks preventing related
issues upon start-up.
On the DuraSpa models only; relieve any excess air through the bleed valve located on the filter
housing lid. This can be achieved by slowly turning the bleed screw anti-clockwise, allowing the air to
slowly escape, and then tightening up by hand before starting up.
QuatroSpa & Orbis
To gauge whether the spa is full; push the
floating vane weir down into the filter
housing until it touches the bottom. When
half of the weir is submerged, the spa is
filled to the correct level.
DuraSpa S160 & S380
Fill the spa so that the second horizontal
slat from the top of the strip skimmer is
completely submerged. Reinsert the filter
cartridge and secure the lid and lock ring
back onto the filter housing.
Do not turn on
the spa without the filter lid locked into
position.